The autoclave molding technique is an advanced carbon fiber composite manufacturing process. It is widely used in industrial, aerospace, and Autoparts to fabricate high strength/ w
Painting the surface of carbon fiber rollers is a common operation. This is because the environment of industrial production workshops is often harsh, with high humidity, strong c
The carbon fiber square tube needs to go through the layup process in the production process, but the rectangular tube layup is more difficult, especially at the corners.
Carbon fiber round pipe is the most commonly used carbon fiber pipe. In production, it is often necessary to lay the carbon fiber prepreg through a reasonable angle.
Gluing is the most basic way to connect carbon fiber components and metal components, which is to add suitable structural glue between the two to fix them. Before gluing, some prep
Ventilation system: Considering the hazards of carbon fiber dust to equipment, human body and the environment, the location and effect of the ventilation system should be preset du
The carbon fiber wound tube needs to tightly roll the prepreg on the core mold, and the core mold itself needs to have good rigidity and will not be deformed during the rolling pr
It is a consensus that pultruded carbon fiber tubes are generally inferior to the wound carbon fiber tubes in terms of mechanical properties. Why is it so? It is also explained fr
If the temperature exceeds the melting point of the resin, the natural carbon fiber board will soften, crack, or even decompose. Not to mention the mechanical properties, it will n
Mold pretreatment: wipe off the dust and impurities inside the mold, cover a layer of plastic film on the surface of the core mold, and preheat the outer mold, and then evenly coat
Carbon fiber board can be used in automobiles, high-speed rails and airplanes, and it is an important boost for the lightweight development of current vehicles.
The fusion of carbon fiber precursor and resin seems to be stable, but in a high temperature environment, this stable structure is easy to disassemble, and softening is only the in
