Carbon fiber round pipe is the most commonly used carbon fiber pipe. In production, it is often necessary to lay the carbon fiber prepreg through a reasonable angle. The number of layers is determined according to the wall thickness of the pipe. There is a special rolling equipment, which uses the upper and lower two circular hot rollers to soften the resin adhesive on the carbon fiber prepreg, and then relies on the friction between the rotating hot roller and the core mold to immerse the pre-laid prepreg The material is rolled on the core mold and compacted.
Put the rolled carbon fiber prepreg together with the mandrel into a hot-pressing furnace to heat and press for curing. Be sure to brush the release agent on the mandrel before rolling the carbon fiber prepreg, otherwise the cured The carbon fiber round tube will be tightly attached to the mandrel and cannot be removed. After ejecting the core mold from the carbon fiber tube through the stripper, a carbon fiber tube appeared.
However, at this moment, the carbon fiber tube does not meet the requirements of use, and the surface needs to be processed. After a few processes of turning, milling, drilling, and grinding, the carbon fiber tube is almost completed, plus the final inspection link, and it can be delivered with confidence. It's in the hands of customers.
